Bohler S590 Microclean for Hobs
2022-08-19 11:55:41
jiangxingTools
2186
Bohler S590 Microclean for Hobs
Material composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30, Co-8.40
Standard: 1.3244, HS6-5-3-8, EN ISO 4957
Performance feature of Gear Hobs with S590:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: high
Edge Stability: high
Grindability: high
Hot Hardness (red hardness): high
相關(guān)文章
-
?PA30° PCD 50mm Bell Type Pinion Cutter with Module m3.5-m5
PA30° PCD 50mm Bell Type Pinion Cutter with Module m3.5-m5Material：HSS M2,M35, M42, S390Module：m3, m... - HSS M2,M35 Chain Sprocket Gear Hob with TiN, AP Coating
- Profile for Hobs
- Bohler S500 for Shaper Cutters and Hobs
- Timing Pulley Hob for (AT.)D.T (D)T10
- Information required when ordering gear hobs
- PA20° HSS M2 Material DIN3972 BP2 Module DP Involute Gear Hob Cutter with TiN Coating
