ISO 4468:2009 Gear hobs-GB/T 6084-2016 General technical specification
2022-10-29 08:31:53
jiangxingTools
2447
ISO 4468:2009 Gear hobs-GB/T 6084-2016 General technical specification
gear hob module: m0.5-m1, m1-m2, m2-m3.5, m3.5-m6, m6-m10, m10-m16, m16-m25, m25-m40
accuracy requirement of hobs: AAAA, AAA, AA, A, B
bore: 8mm, 10mm, 13mm, 22mm, 27mm, 32mm, 40mm, 50mm, 60mm, 80mm
number of starts: single, two, three, four, five, multi-starts
material: HSS M2, M35, M42, ASP2052, S390, and Carbide
相關(guān)文章
-
PA20° DIN3972 Standard DP Gear Hob
PA20° DIN3972 Standard DP Gear HobTooth profile is according to GB, DIN3972-2 standardMaterial is HS... - PA20° Profile DIN3972 Standard Pre-grind Gear Cutting Hob with Module m1.25
- Taper Shanks for Shank Type Gear Shaper Cutters
- Low Speed Bore Type Solid Carbide Hob for Soft Tooth Oil Cutting
- HSS M2, M35, ASP30, ASP52, S390 Disk Type Gear Shaper Cutter with DIN3972 Profile
- Dry Cutting Gear Hobs
- HSS gear hob cutter with relief ground DIN 8002 B
